Products tagged with 'Melbourne'

The EW-FJ-TOWS Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation.

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Sydney, Brisbane, Melbourne and Perth

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. Stock Sydney, Brisbane, Melbourne and Perth

The type EW-SFJCS100-M Fixed Jib (Short) is designed as an affordable general purpose Jib able to move in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been designed with wide pockets suitable for Forklifts with special hydraulic Tine Positioners. This slip-on Forklift attachment is held to the Forklift by a safety chain. The Jibs overall length when closed is 1.39 metres.Supplied with safety swivel Hook and Shackle. In Stock Melbourne.

The EW-IJS25 Incline Jib 2.5 Ton Short allows for additional height, compensating for length of the hook and slings when lifting. The jib boom can be set at 3 angled positions as well as level. This jib also offers 5 different hook positions with a 2 metre maximum reach. Manufactured with a Hot Dip Galvanized Finish, they are supplied with a Safety Swivel Hook and Shackle.

The EW-FJERJL45 Low Profile Forklift Jib is an affordable general-purpose jib. It has a low profile design, with a 3.4 metre reach when fully extended, allowing for long reach lifts. The jibs overall length when retracted is 2.0 metres. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with safety Hook and Shackle. In Stock Melbourne.

The Rigid Jib 4.75 Ton Long is an affordable general purpose jib. It is maneuverable in confined spaces with the ability to extend out to 3.5 metres when fully extended. Manufactured with a Hot Dip Galvanized Finish, they are supplied with a Safety Swivel Hook and Shackle. In Stock Melbourne.

The EW-RJS475 is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with Hook and Shackle. In Stock Melbourne.

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Melbourne Noble Park warehouse and VIC regional delivery available

2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Sydney , Brisbane, Melbourne and Perth.

Forklift jib attachment with 2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Melbourne Noble Park warehouse.

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Melbourne Noble Park warehouse or VIC delivery available

This forklift attachment is a slip on style unit that has two hook locations with 3200Kg load capacity and gives the operator a 569/1174mm load point from the forklift carriage face. The second function of the Forklift Towball Jib allows the towball fitting to assist with the movement of standard hitch trailers with a maximum ball load weight of 10% of the capacity or 300Kgs dead weight at hitch point.